WEDA L80N
The WEDA L80N slurry pump features a max head of up to 98ft, max flow of 660USgpm, and can withstand solids of up to 1.0in.
The WEDA slurry pumps are the toughest and have the largest apertures to facilitate handling of slurry with the most challenging solids. These pumps are specially designed to operate in quarries, dredging and settling ponds, dealing with abrasive media with high solids content.
| Specifications | 3ph | |
| Max. head | ft | 98 |
| Max. flow | US gpm | 660 |
| m3/hr | 152 | |
| Rated output | hp | 20 |
| Max. power input | kW | 22 |
| Discharge connection | in | ASME 4" 150lb |
| Max solid handling | in | 1.0 |
| Product Code | Weda L80N |
| Installation | Portable |
| Discharge connection | DN100/ASME 4 in/DIN |
| Hydraulic range | N - Normal Head |
| Solid handling | Max. solids 25 mm 1 in |
| Liquid temperature | max 95°F (35°C), standard |
| pH of the liquid pumped | pH 4-10 |
| Frequency | 60 Hz |
| Number of poles | 4 |
| Insulation class | H |
| Portection class | IP68 |
| Thermal contacts | 230°F (110°C) |
| Cable | H07RN-F 4G10/SOOW 4xAWG6 |
| Cable length | 65 ft (20m) |
| Outer casing | CI Alloy |
| Impeller | Cr Alloy CI |
| Wear parts | Cr Alloy CI |
| Stator housing | CI Alloy |
| Strainer | Steel |
| Shaft | Stainless steel |
| O-rings | Viton |
| Discharge connection | Steel |
| Bearings | Heavy Duty Bearings |
| Motor Side Seals | 1 mechanical seal (silicon carbide in oil bath) |
| Impeller Side Seals | 1 mechanical seal (silicon carbide in oil bath) + 4 lip seal (2 BUNA + 2 TPU) |
| Discharge | Flange |
| Start type | Direct-on-line |
| Weight and dimensions | |
| Weight (lb) | 689 |
| Hieght (in) | 42.5 |
| Width (in) | 22.8 |
| Diameter (in) | 19.5 |