WEDA D100N
The WEDA D100N drainage pump features a max head of up to 115ft, max flow of 6100USgpm, and can withstand solids of up to 0.47in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
| Product Code | WEDA D100N |
| Installation | Portable drainage pump |
| Hydraulic range | N - normal head |
| Insulation class | F (+155°C/+311°F) IEC 85 |
| Protection class | IP68 |
| Voltage variation | Max ± 5% of nominal voltage |
| Voltage imbalance | Max 2% - between phases |
| Max start-stop | Max 30 starts/hour |
| Cable | H07RN-F (20 m) or SOOW AWG (65 ft) |
| Casted parts | Corrosion resistant aluminum |
| Impeller | High chrome iron, 55±5 HRC |
| Wear parts | Cast iron |
| Strainer | Galvanized steel |
| Shaft | Stainless steel |
| O-rings | Rubber (NBR) |
| Main bearing | 2 x single row ball bearing in oil |
| Mechanical seal | Primary + secondary: SiC/SiC |
| Thermal contacts | 140°C / 284°F |
| Options / accessories | Zinc anodes Epoxy coating Couplings (hose / NPT / ISO-G) Pump raft NSSHÖU screened cable |
| Solids handling, strainer hole | 0.47 in |
| Liquid temperature | Max 104°F |
| Depth of immersion | Max 65 ft |
| Max liquid specific gravity | 1.1 |
| pH of the pumped liquid | pH 5–8 |
| Weight and dimensions | H - High Head |
| Discharge connection (in) | 10 |
| Hieght (in) | 55.5 |
| Width (in) | 25.5 |
| Diameter (in) | 23.6 |
| Weight (excl. cable) (lb) | 1133 |