PAC H64 E 350HP
The PAS 100 HF Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the Construction dewatering and municipal market segment where reliability, serviceability and versatility is the key to provide a customized solution. Other suitable applications can be found within the Industry, Mining or Oil & Gas segment. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.
PAC H64 Electric - Vacuum prime centrifugal pumpsThe pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. The PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency
| Pump | |
|---|---|
| Model | PAC H64 E 350HP |
| Qmax | 1,900 USgpm |
| Hmax | 380 ft |
| Q max eff. | 2,100 USgpm |
| Eff. max | 69% |
| Suction port | 6" Flange - ANSI class 150 |
| Delivery port | 4" Flange - ANSI class 150 |
| Impeller type | Enclosed, 2 vane |
| Impeller diameter | 17" |
| Solids handling | 3" |
| Material | |
| Casing | ASTM A536 ductile iron |
| Impeller | ASTM A743 CA6NM |
| Wear Ring | ASTM A48 Class 20 cast iron |
| Wear Plate | ASTM A48 Class 20 Grey Iron + NBR rubber coating |
| Shaft | AISI 630 stainless steel |
| Mechanical Seal faces | Silicon carbide Vs Silicon carbide |
| Elastomers | VITON |
| Check Valve | ASTM A536 ductile iron + NBR rubber flap |
| Separator | Steel |
| Priming System | |
| Vacuum pump | |
| Vacuum pump type | Diaphragm |
| Nominal air capacity | 50.0 cfm |
| Max vacuum | - 26.6 inHg |
| Drives | Link belt |
| Engine | |
|---|---|
| Make | Weg |
| Type | Three Phase Induction Motor |
| Cooling Method | IC411 - TEFC |
| No. poles | 4 |
| Tension supply | 460 V |
| Frequency | 60 Hz |
| Rated Power | 350 HP |
| Rated Speed | 1,790 rpm |
| Rated Current | 384 A |
| Efficiency class | W22 NEMA premium efficiency |
| Max Effiency | 96.2% |
| Protecting rating | IPW55 |
| Insulation class | F |
| Thermal Protection | PTC Thermistors |
| Duty Cycle | Continuous - S1 |
| Arrangement | |
| Technical data | |
| Material | ASTM A36 steel |
| Coatings | Epoxy powder, average thickness of 3 MIL |
| Features | Lifting beam. Fork lift pockets. Pump access through hinged door. |
| Dry weight | 6,724 lbs |